How To Install Easy Heat

How To: Heating Tapes Easy Installation

How To Install Heat Tape

Heating tape is an easy-to-utilise, ideal for a broad range of pipage heating applications and inexpensive. This article volition provide simple installation tips to meliorate your heating tape product life, application performance, and near importantly, your safety.

Heating Tape Advantages :

• Flexibility: Easily installs directly to a broad multifariousness of surfaces and geometries (i.due east. 1/iv" diameter or larger piping, glassware, valves, reactors, chambers, etc.)
• Rapid and uniform rut-up due to high watt densities and userconfigurable installations
• High temperature ranges
• Easily controlled with standard temperature decision-making devices
• Diversity of sizes, wattages, temperature ranges, and styles available to run into your exact heating requirements

Step 1: Pipe Surface Grooming

Prepare surface to be heated: Wipe the surface making sure there is no strange material, like liquid, on the surface. Foreign textile inhibits heat transfer and liquid can damage select models of heating tape (i.e. HighTemperature Heating Tapes).

Brand a visual inspection of heating tape: We recommend that you replace the heating tape if it becomes torn or damaged. Damaged heating tape is a safety risk and will non operate correctly.

Selecting the Proper Heating Record
Pick of your record depends on:

• Length, diameter, and configuration of the surface to be heated
• Required temperature
• Required wattage
• Ecology conditions (i.e. likelihood heating tape volition come into contact with wet or chemicals)

Pace 2: Heating Tape Installation (wrap)

---

Heating tape tin can exist installed on almost any surface due to its flexibility. Screw wrap the heating tape onto the surface to exist heated so that the length of one entire side of the heating tape is in full contact with the surface (Figure B). The altitude between spiral wraps is dependent on the uniformity requirements and the amount of bachelor heating tape. A minimum altitude of 1/8" is required between spiral wraps to avoid damage to the heating tape.

Attach the heating record to the surface past either using congenital-in necktie straps [select models](Figure C), high-temperature adhesive tape (Effigy D), or mechanical clamping devices that will not cause damage to the heating tape.

Practice non overlap heating record on itself (Figure G). This can crusade damage to the heating tape due to overheating.

Stride three: Connecting Your Heating Record to a Temperature Controlling Device

---

Your heating tape must be connected to an external temperature command device (Figure H). Ensure your temperature controller is protected by a properly sized circuit breaker or fuse. Utilise of a ground error circuit interrupter is highly recommended and may be required for your installation.

For proper temperature control, secure a thermocouple, RTD, or other sensing device with one strip of agglutinative tape so that it is in close proximity to the heater to prevent overheating.

PDF Guide Download: PDF Download - Heating Record Installation How To Guide

DOs

• Make sure you have selected the correct heating record for your application. BriskHeat offers a wide range of sizes, voltages, and temperature ranges.
• Visually check your heating tape prior to use.
• Make sure that the heating tape makes full contact with the surface to be heated.
• Ever follow the manufacturer's instructions while installing or removing heating record.

DONTs

• Do not overlap the heating tape over itself
• Practice not use heating tape without a controlling device
• Practise not install heating record on top of insulation near combustible materials, submerged in liquids, or if cut in any way.

Download Awarding Note PDF:

Source: https://www.briskheat.com/how-to-heating-tape-installation

Posted by: jarrettsearpon.blogspot.com

Share this post